|
|
 |
|
|
64 or 128-bit Hardware-Based Encryption
Infinitely more secure than software or biometric-based encryption.
The Enova X-Wall® engine provides real-time, hardware-based encryption and decryption.
X-Wall shuttles encrypted data as fast as the installed HDD reads and writes.
Unlike easily circumvented and platform dependent software or biometric encryption, X-Wall strongly encrypts every bit and byte on the drive, including the directory.
The included secure key must be present to mount the drive.
Without the key, the drive and its data are rendered useless and unreadable.
Two keys are included with each 64-bit DriveMate (3 keys with 128-bit) - additional keys available on request.
Enova's X-Wall technology provides the world's most secure method to encrypt digital data:
- Hardware key must be present at drive mount time - after drive mounts, the key can be removed and secured
- One set of keys can secure multiple drive enclosures - the key holds all the power
- Attempts to crack X-Wall receive no 'bingo' answer to key injections, and a mount attempt must follow each try
- Would require decades or even centuries to crack 64-bit Enova X-Wall hardware encryption
- 192-bit software or biomentric HDD encryption can be readily cracked in hours or days
|
|
Impact 3.5in HDD Enclosure
Ruggedized storage enclosures combine multi-layer hardware protection and secure 64 or 128-bit data encryption.
Description:
Impact ruggedized storage enclosures provide the ultimate physical and thermal protection for your valuable data.
Protection starts with Impact's tough, yet lightweight heat-dissipating 1.5mm thick extruded 6075 Aluminum alloy shell - highly efficient convection cooled interior
negates the need for a distracting cooling fan.
The tubular shell features 3mm thick, full-length stiffening runners, providing exceptional load-bearing capabilities and physical crush resistance.
And all Impact FireWire enclosures include full 1394 repeater functionality.
A full-length bridgeboard features anti-shock damper strips and is suspended within the enclosure by
full-length radial Aluminum stand-off ribs. An array of self-limiting HDD-mounting shoulder screws are suspended within the bores of 4 resilient grommets.
This arrangement forms an effective anti-shock chamber, further guarding the HDD and electronics from impact and crush damage.
Self-aligning guide rails assure hassle-free installation of virtually all 3.5 inch Hard Disk Drives.
Horizontally stackable or vertically standable via the included rubber-footed base, Impact enclosures deliver the flexibility you need to be productive.
Easy Set-up: Installing your Hard Disk Drive into the Impact enclosure is fast and easy.
Each enclosure includes all mounting hardware, data cables for all supported connection busses and world voltage AC power supply.
Philips drivers (#0 and #1) are required (not included) to access the enclosure and mount HDD.
Get Impact with Seagate Disk Drives Pre-installed.
RadTech now offers Impact enclosures with a pre-installed Seagate disk drive. The global leader in magnetic disk drive technology, Seagate
hard disk mechanisms offer the performance and reliability standards by which all others are judged. In addition to industry-leading
performance and reliability, Seagate disk drives offer the best warranty in the business - a full 3 years of confidence inspiring replacement coverage -
more HDD info HERE
Reliable data storage is crucial to your success - don't trust it to anything less than the absolute best.
Features:
- Maximum physical, thermal and encrypted data protection with top-speed data transfer performance.
- Certified by the National Institute of Standards & Technology and the Canadian Security Establishment
- Rugged extruded Aluminum enclosure provides exceptional crush and impact protection.
- All FireWire (1394a/b) models include repeater functionality when externally powered
- Heat dissipating design keeps hard drives running cool - extending their lifespan.
- Easy HDD installation - all hardware and high-quality connection cables included.
- Stack horizontally, or stand vertically using included stand base.
- Firewire models are fully boot capable for Mac OS 9 and 10.
- Non-encrypted models also available - Click here for details.
|
|
Product Details
|
|
| Model |
3.5in USB 2.0 |
3.5in USB 2.0 & FireWire 400 |
3.5in USB 2.0 & FireWire 800 |
| SKU |
13-627 |
13-628 - 13-656 |
13-629 - 13-657 |
| » Features |
|
| - |
Supports Hi-Speed USB data transfer speed of up to 480Mbps, and FireWire 400/800 data transfer speed up to 400Mbps/800Mbps. |
| - |
Allows driverless installation as a USB Mass Storage Device with Mac OS 9.2 and up, Windows Vista, XP, 2000 and ME. |
| - |
Supports most 3.5� HDDs, and ultra-high capacity drives - 137GB +. |
| - |
Connects easily - plug-n-play. |
| - |
Combines enclosure and 1394 repeater functionality. |
| - |
Maximized thermal protection via heat-sinked Aluminum shell. |
| - |
Robust HDD mounting mechanism to reduce risk of HDD damage during movement. |
| - |
Prevents drop damage to HDD via anti-shock design. |
| - |
Rear panel power switch eliminates need for power supply disconnect. |
| - |
Supports DES hardware encryption data security. |
|
| » Specifications |
| Bridge Chipset |
Cypress EZ-USBAT2+
ENOVO X-WALL LX40 (encryption)
|
Cypress EZ-USBAT2+
Initio INIC 1430
ENOVO X-WALL LX40 (encryption)
|
Oxford UF922
ENOVO X-WALL LX40 (encryption)
|
| Bus Interface |
USB 2.0
|
USB 2.0 and IEEE 1394a
|
USB 2.0 and IEEE 1394b
|
| Data Speeds |
12Mb/480Mbps
|
USB 2.0 Port: 12Mb/480Mbps
IEEE 1394a (FW400) port:
100/200/400 Mbps
|
USB 2.0 Port: 12Mb/480Mbps
IEEE 1394b (FW800) port:
100/200/400/800 Mbps
|
| HDD Suspend Mode Sleep Y/N |
No - Self Powered
|
No - Self Powered
|
No - Self Powered
|
| Connectors |
One USB mini-B port
One security key port
|
One USB mini-B port
Two 6-pin 1394a ports
One security key port
|
One USB mini-B receptacle
Two 9-pin 1394b connectors
One security key receptacle in 6-pin 1394a form
|
| Rear Panel |
 |
 |
 |
| IDE Standard |
Compliant with ATA-6
LBA-48 Bit (large capacity 137 GB)
UDMA: 66/100/133 models
|
| IDE Transfer Rate |
UDMA 66
|
USB 2.0: UDMA 66
FireWire: UDMA 66/100
|
UDMA 66/100/133
|
| HDD Support |
3.5" ATA-6 HDD |
| LED |
Power on/Security Error/Access |
| Power Supply |
AC Adapter 12V/3A, 110V ~ 240V Full Range |
| In The Box |
Enclosure, Stand, AC Adapter, USB A/mini-B Cable, User Manual, Secure Keys (2) |
Enclosure, Stand, AC Adapter, USB A/mini-B & FW400 Cables, User Manual, Secure Keys (2-64bit, 3-128bit) |
Enclosure, Stand, AC Adapter, USB A/mini-B & FW800 Cables, User Manual, Secure Keys (2-64bit, 3-128bit) |
Dimension
(L x W x H) |
227 x 135 x 45 mm |
242 x 135 x 45 mm |
Weight
(w/o HDD) |
815g |
870g |
876g |
| Certifications |
NIST (National Institute of Standards and Technology)
CSE (Canadian Security Establishment)
FCC/CE, RoHS
|
| » Minimum System Requirements |
| Mac*** |
Macintosh PowerPC/Intel processor
Mac OS 9.X or higher
One available USB port
|
Macintosh PowerPC/Intel processor
Mac OS 9.X or higher
One available USB port or IEEE 1394a/b port
|
Macintosh PowerPC/Intel processor
Mac OS 9.X or higher
One available USB port or IEEE 1394a/b port
|
| PC |
266Mhz CPU 64MB RAM
Microsoft Windows 98SE - Vista
One Available USB port
|
266Mhz CPU 64MB RAM
Microsoft Windows 98SE - Vista
One Available USB port or IEEE 1394a/b port
|
266Mhz CPU 64MB RAM
Microsoft Windows 98SE - Vista
One Available USB port or IEEE 1394a/b port
|
***Mac OS:
- To operate HDD enclosure via USB2.0, Mac OS X 10.3, or 10.1.5/10.2.x with USB 2.0 driver installed is required to support high speed
USB2.0. Mac OS 9.x supports full speed only. Mac OS supports USB 2.0 driver since Mac OS X 10.2.8.
- Connection of HDD enclosure via FireWire cable requires FireWire HDD support driver. Mac OS 8.6 users may need to download
FireWire support driver in order to access HDD enclosure.
- Operation of HDD enclosure via FireWire 800 (1394b) requires Mac OS X 10.2.4 or newer to support FireWire 800 speed.
|
|
|
